300mm (12") Digital Depth Gauge

QUICK OVERVIEW

300mm (12inch) digital depth gauge with internal step measuring hook. The base is 100mm (4inch) wide

• Key Features
• Measurements - The base is100mm (4inch) wide. The clear and easy to read display can be set to zero in any position, metric or imperial display and auto shut off
• External data output interface via data cable - Please note data cable is not supplied
• Included with the gauge - Storage case, Battery and Instructions
• The Measuring Hook - The additional versatility of the measuring hook allows this gauge to be used to measure thickness, internal steps on a work piece and access other restricted features
• The hook is precision ground and hardened, to a thickness of 2mm. The gauge is easy to calibrate, by closing the gauge so the hook is in contact with the caliper base and pressing zero
• When a thickness or internal step dimension is measured a direct reading can taken from the display. If a depth measurement is taken 2 millimeters will need to be added to the displayed value
• If the gauge is solely used for the purpose of depth measurement the hook can be cut off and removed permanently
• Measuring Range - 2-300mm (0-12 inch)
• Resolution - 0.01mm (0.0005inch)
• Base Width - 100mm (4 inch)
• LCD Display - 7mm character height
• Battery - 1.55V SR44